It's the old thread, but still..
The solution for Hetzner is to change in the /etc/sysconfig/network-scripts/ifcfg-eth0 GATEWAY together with NETMASK
For example
# device: eth0
DEVICE=eth0
ONBOOT=yes
HWADDR=90:1B:0E:B9:XX:XX
BOOTPROTO=none
IPADDR=XX.XX.0.36
NETMASK=255.255.255.128
GATEWAY=XX.XX.0.1
#SCOPE="peer XX.XX.0.1"
IPV6INIT=no
IPV6ADDR=2a0XXXXXXXXXXX
IPV6_DEFAULTGW=XXXXX
IPV6_DEFAULTDEV=eth0
[Solved] Zimbra installation Bug On centos 7
Re: Zimbra installation Bug On centos 7
I have just registered on this forum in order to THANK YOU syslint for a brilliant solution.syslint wrote:Yes, To solve this issue . Please do it as follows,
Edit the file /etc/sysconfig/network-scripts/ifcfg-eth0 and change the line of peer with GATEWAY. Then restart the network. That will solve the issue.
My Hetzner server works now with DHCP settings. After setting my IP settings to automatic in Network Manager, i got the IP address in the global scope. I have always assigned same public IP by their DHCP server.
You saved my day.
Cheers
Re: Zimbra installation Bug On centos 7
Hi .. I am installing zimbra 8.8 on Ubuntu 18. My Public IP received through PPPoE as a peer. (i understand peer as an ip heaving subnet /32 )syslint wrote: For ubuntu add the following in interface fileCode: Select all
up route add -net 136.243.150.128 netmask 255.255.255.192 gw 136.243.150.129 eth0
I am heaving same issue. Can't call method "addr" on an undefined value at /opt/zimbra/libexec/zmsetup.pl line 2228.
I tried your above code with my network details but failed. trying from 2 days.
Help please..