Bu Details :
Zimbra exit with the following errors
Code: Select all
Installing zimbra-core zimbra-ldap zimbra-logger zimbra-mta zimbra-snmp zimbra-store zimbra-apache zimbra-spell...done
Operations logged to /tmp/zmsetup.20160922-172440.log
Installing LDAP configuration database...done.
Setting defaults... MX: mymail.com (85.10.200.10)
Interface: 127.0.0.1
Interface: 136.243.150.152 136.243.150.129
85.10.200.10
Can't call method "addr" on an undefined value at /opt/zimbra/libexec/zmsetup.pl line 1724.
Code: Select all
# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
136.243.150.152 mymail.com
# cat /etc/redhat-release
CentOS Linux release 7.2.1511 (Core)
# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 136.243.150.152 netmask 255.255.255.255 broadcast 136.243.150.152
ether 90:1b:0e:8b:0f:db txqueuelen 1000 (Ethernet)
RX packets 1127103 bytes 1663714382 (1.5 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 94264 bytes 6978866 (6.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16 memory 0xf7000000-f7020000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 12 bytes 600 (600.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 12 bytes 600 (600.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 90:1b:0e:8b:0f:db brd ff:ff:ff:ff:ff:ff
inet 136.243.150.152 peer 136.243.150.129/32 brd 136.243.150.152 scope global eth0
valid_lft forever preferred_lft forever
#
Please note We have seen this issue in a lot of servers. The solutions was to downgrade the OS.