Zimbra Admin is blank
Posted: Thu Jul 19, 2018 4:56 pm
Hi,
I just setup ZCS 8.8.9 OSS multi server (Admin node running only UI).
When I try to access the Admin page (https://<Admin host IP>:7071/zimbraAdmin/) I got a blank page.
Also if I execute the following commands on admin node I got the following errors:
[zimbra@ml-admin ~]$ zmmailbox -z -m admin@ml-ldap01.x.internal gaf
Id View Unread Msg Count Path
---------- ---- ---------- ---------- ----------
ERROR: service.FAILURE (system failure: error while proxying request to target server: HTTP/1.1 503 Service Unavailable) (cause: com.zimbra.common.service.ServiceException error while proxying request to target server: HTTP/1.1 503 Service Unavailable)
[zimbra@ml-admin ~]$ zmprov fc all
ERROR: service.INVALID_REQUEST (invalid request: can only be used with SOAP)
I read "https://wiki.zimbra.com/wiki/Zimbra_Adm ... t_is_blank" then I checked and I do not have the "service" service enabled:
[zimbra@ml-admin ~]$ zmprov gs `zmhostname` zimbraServiceEnabled
# name ml-admin.x.internal
zimbraServiceEnabled: logger
zimbraServiceEnabled: zimbra
zimbraServiceEnabled: zimbraAdmin
zimbraServiceEnabled: zimlet
zimbraServiceEnabled: stats
zimbraServiceEnabled: spell
Then I executed:
zmprov ms `zmhostname` +zimbraServiceEnabled service
zmcontrol stop
zmcontrol start
And now on Admin I have :
[zimbra@ml-admin ~]$ zmprov gs `zmhostname` zimbraServiceEnabled
# name ml-admin.x.internal
zimbraServiceEnabled: logger
zimbraServiceEnabled: zimbra
zimbraServiceEnabled: zimbraAdmin
zimbraServiceEnabled: zimlet
zimbraServiceEnabled: stats
zimbraServiceEnabled: spell
zimbraServiceEnabled: service
Other info about Admin node:
zimbra@ml-admin ~]$ zmprov gs `zmhostname` zimbraReverseProxySSLToUpstreamEnabled zimbraReverseProxyLookupTarget \
> zimbraReverseProxyHttpEnabled zimbraMailReferMode zimbraMailPort zimbraMailProxyPort zimbraMailSSLPort zimbraMailSSLProxyPort \
> zimbraMailMode zimbraReverseProxyMailEnabled zimbraReverseProxyMailMode zimbraImapBindPort zimbraImapProxyBindPort \
> zimbraImapSSLBindPort zimbraImapSSLProxyBindPort zimbraImapCleartextLoginEnabled zimbraPop3BindPort zimbraPop3ProxyBindPort \
> zimbraPop3SSLBindPort zimbraPop3SSLProxyBindPort zimbraPop3CleartextLoginEnabled zimbraAdminPort zimbraAdminProxyPort \
> zimbraReverseProxyAdminEnabled
# name ml-admin.x.internal
zimbraAdminPort: 7071
zimbraAdminProxyPort: 9071
zimbraImapBindPort: 7143
zimbraImapCleartextLoginEnabled: TRUE
zimbraImapProxyBindPort: 143
zimbraImapSSLBindPort: 7993
zimbraImapSSLProxyBindPort: 993
zimbraMailMode: https
zimbraMailPort: 8080
zimbraMailProxyPort: 80
zimbraMailReferMode: reverse-proxied
zimbraMailSSLPort: 8443
zimbraMailSSLProxyPort: 443
zimbraPop3BindPort: 7110
zimbraPop3CleartextLoginEnabled: TRUE
zimbraPop3ProxyBindPort: 110
zimbraPop3SSLBindPort: 7995
zimbraPop3SSLProxyBindPort: 995
zimbraReverseProxyAdminEnabled: FALSE
zimbraReverseProxyHttpEnabled: TRUE
zimbraReverseProxyLookupTarget: FALSE
zimbraReverseProxyMailEnabled: TRUE
zimbraReverseProxySSLToUpstreamEnabled: TRUE
The errors still happens.
What I have to check?
Any help will be greatly appreciated.
Tnx & br
I just setup ZCS 8.8.9 OSS multi server (Admin node running only UI).
When I try to access the Admin page (https://<Admin host IP>:7071/zimbraAdmin/) I got a blank page.
Also if I execute the following commands on admin node I got the following errors:
[zimbra@ml-admin ~]$ zmmailbox -z -m admin@ml-ldap01.x.internal gaf
Id View Unread Msg Count Path
---------- ---- ---------- ---------- ----------
ERROR: service.FAILURE (system failure: error while proxying request to target server: HTTP/1.1 503 Service Unavailable) (cause: com.zimbra.common.service.ServiceException error while proxying request to target server: HTTP/1.1 503 Service Unavailable)
[zimbra@ml-admin ~]$ zmprov fc all
ERROR: service.INVALID_REQUEST (invalid request: can only be used with SOAP)
I read "https://wiki.zimbra.com/wiki/Zimbra_Adm ... t_is_blank" then I checked and I do not have the "service" service enabled:
[zimbra@ml-admin ~]$ zmprov gs `zmhostname` zimbraServiceEnabled
# name ml-admin.x.internal
zimbraServiceEnabled: logger
zimbraServiceEnabled: zimbra
zimbraServiceEnabled: zimbraAdmin
zimbraServiceEnabled: zimlet
zimbraServiceEnabled: stats
zimbraServiceEnabled: spell
Then I executed:
zmprov ms `zmhostname` +zimbraServiceEnabled service
zmcontrol stop
zmcontrol start
And now on Admin I have :
[zimbra@ml-admin ~]$ zmprov gs `zmhostname` zimbraServiceEnabled
# name ml-admin.x.internal
zimbraServiceEnabled: logger
zimbraServiceEnabled: zimbra
zimbraServiceEnabled: zimbraAdmin
zimbraServiceEnabled: zimlet
zimbraServiceEnabled: stats
zimbraServiceEnabled: spell
zimbraServiceEnabled: service
Other info about Admin node:
zimbra@ml-admin ~]$ zmprov gs `zmhostname` zimbraReverseProxySSLToUpstreamEnabled zimbraReverseProxyLookupTarget \
> zimbraReverseProxyHttpEnabled zimbraMailReferMode zimbraMailPort zimbraMailProxyPort zimbraMailSSLPort zimbraMailSSLProxyPort \
> zimbraMailMode zimbraReverseProxyMailEnabled zimbraReverseProxyMailMode zimbraImapBindPort zimbraImapProxyBindPort \
> zimbraImapSSLBindPort zimbraImapSSLProxyBindPort zimbraImapCleartextLoginEnabled zimbraPop3BindPort zimbraPop3ProxyBindPort \
> zimbraPop3SSLBindPort zimbraPop3SSLProxyBindPort zimbraPop3CleartextLoginEnabled zimbraAdminPort zimbraAdminProxyPort \
> zimbraReverseProxyAdminEnabled
# name ml-admin.x.internal
zimbraAdminPort: 7071
zimbraAdminProxyPort: 9071
zimbraImapBindPort: 7143
zimbraImapCleartextLoginEnabled: TRUE
zimbraImapProxyBindPort: 143
zimbraImapSSLBindPort: 7993
zimbraImapSSLProxyBindPort: 993
zimbraMailMode: https
zimbraMailPort: 8080
zimbraMailProxyPort: 80
zimbraMailReferMode: reverse-proxied
zimbraMailSSLPort: 8443
zimbraMailSSLProxyPort: 443
zimbraPop3BindPort: 7110
zimbraPop3CleartextLoginEnabled: TRUE
zimbraPop3ProxyBindPort: 110
zimbraPop3SSLBindPort: 7995
zimbraPop3SSLProxyBindPort: 995
zimbraReverseProxyAdminEnabled: FALSE
zimbraReverseProxyHttpEnabled: TRUE
zimbraReverseProxyLookupTarget: FALSE
zimbraReverseProxyMailEnabled: TRUE
zimbraReverseProxySSLToUpstreamEnabled: TRUE
The errors still happens.
What I have to check?
Any help will be greatly appreciated.
Tnx & br