Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Client.
-
- Posts: 17
- Joined: Sun Feb 02, 2014 9:10 pm
Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Client.
I just upgrade our server to latest 8.6 Network Edition. Now we are facing issue where client will not able to login to webmail using http with error "Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Client.". but they will not have any issue when they login using https. due to our server is hosting few domains for different users, we cannot ask them to use https as they will get ssl error. i have check the cookie is enabled inside the browser, this only happened after i upgrade the server to 8.6.
from nginx log i can see:
2015/02/08 20:49:01 [info] 15838#0: *181 client prematurely closed connection while reading client request line, client: 113.210.10.79:56520, server: mail.myserver.com.default
Does anyone have any issue like this?
from nginx log i can see:
2015/02/08 20:49:01 [info] 15838#0: *181 client prematurely closed connection while reading client request line, client: 113.210.10.79:56520, server: mail.myserver.com.default
Does anyone have any issue like this?
- jorgedlcruz
- Zimbra Alumni
- Posts: 2782
- Joined: Thu May 22, 2014 4:47 pm
Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Client.
Hi Ahmad Faizal Abdul Latif,
I've tried with zmtlsctl in both, I can assume that you have it too in the same level, try to execute:
zmtlsctl redirect
zmcontrol restart
zmtlsctl both
zmcontrol restart
And let us know, I could see the error that you had one, but when I try to login again, I don't have any problem now.
Let us know.
I've tried with zmtlsctl in both, I can assume that you have it too in the same level, try to execute:
zmtlsctl redirect
zmcontrol restart
zmtlsctl both
zmcontrol restart
And let us know, I could see the error that you had one, but when I try to login again, I don't have any problem now.
Let us know.
-
- Posts: 17
- Joined: Sun Feb 02, 2014 9:10 pm
Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Client.
Hi Jorge de la Cruz,
i try the solution you give last night but no luck for me. i force proxy regenerate config again last night. using the step at this link http://wiki.zimbra.com/wiki/Enabling_Zimbra_Proxy
using the command zmproxyconfig. and restart zimbra then it works fine. i believe the issue is with the nginx configuration not able to set/check cookies to the client browser.
but the issue resolve now.
i try the solution you give last night but no luck for me. i force proxy regenerate config again last night. using the step at this link http://wiki.zimbra.com/wiki/Enabling_Zimbra_Proxy
using the command zmproxyconfig. and restart zimbra then it works fine. i believe the issue is with the nginx configuration not able to set/check cookies to the client browser.
but the issue resolve now.
Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Client.
Here is one solution which was tested and worked:
Steps:
(In this example, we have http and https enabled)
1. Reconfigure nginx:
$ /opt/zimbra/libexec/zmproxyconfig -e -w -o -a 8080:80:8443:443 -x both -H `zmhostname`
2. If the ''zimbraReverseProxySSLToUpstreamEnabled'' is configured to TRUE, the above command will fail with:
"proxy mail mode both is invalid when SSL to upstream is enabled". To change it to FALSE
$ zmlocalconfig zimbraReverseProxySSLToUpstreamEnabled FALSE
3. $ zmtlsctl both
4. $ zmprov ms `zmhostname` zimbraReverseProxyMailMode both
5. $ zmprov ms `zmhostname` zimbraMailMode both
6. $ zmcontrol restart
The commands above need to be run on all proxy servers.
Steps 1-2 might be skipped, but it was not tested if skipping them will fix the problem %100.
Steps:
(In this example, we have http and https enabled)
1. Reconfigure nginx:
$ /opt/zimbra/libexec/zmproxyconfig -e -w -o -a 8080:80:8443:443 -x both -H `zmhostname`
2. If the ''zimbraReverseProxySSLToUpstreamEnabled'' is configured to TRUE, the above command will fail with:
"proxy mail mode both is invalid when SSL to upstream is enabled". To change it to FALSE
$ zmlocalconfig zimbraReverseProxySSLToUpstreamEnabled FALSE
3. $ zmtlsctl both
4. $ zmprov ms `zmhostname` zimbraReverseProxyMailMode both
5. $ zmprov ms `zmhostname` zimbraMailMode both
6. $ zmcontrol restart
The commands above need to be run on all proxy servers.
Steps 1-2 might be skipped, but it was not tested if skipping them will fix the problem %100.
Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Client.
Hi Ahmad,
I'm running into the same problem as you. Just want to confirm that you were doing the steps below to fix it.
If localconfig key 'zimbra_require_interprocess_security' is set, Only "https" and "both" are valid modes
./libexec/zmproxyconfig -e -w -o -a 8080:80:8443:443 -x <https/both> -H `zmhostname`
Else if 'zimbra_require_interprocess_security' is unset, Only "http" and "both" are valid modes
./libexec/zmproxyconfig -e -w -o -a 8080:80:8443:443 -x <http/both> -H `zmhostname`
Set the mail proxy ports
./libexec/zmproxyconfig -e -m -o -i 7143:143:7993:993 -p 7110:110:7995:995 -H `zmhostname`
Now, to have all the mailbox servers use the proxy, simply set the zimbraMailReferMode to reverse-proxied on each mailbox server and restart mailboxd to have all the traffic go through the proxy. Do a 'zmcontrol restart' on this node and you should be up and running.
Please advise.
I'm running into the same problem as you. Just want to confirm that you were doing the steps below to fix it.
If localconfig key 'zimbra_require_interprocess_security' is set, Only "https" and "both" are valid modes
./libexec/zmproxyconfig -e -w -o -a 8080:80:8443:443 -x <https/both> -H `zmhostname`
Else if 'zimbra_require_interprocess_security' is unset, Only "http" and "both" are valid modes
./libexec/zmproxyconfig -e -w -o -a 8080:80:8443:443 -x <http/both> -H `zmhostname`
Set the mail proxy ports
./libexec/zmproxyconfig -e -m -o -i 7143:143:7993:993 -p 7110:110:7995:995 -H `zmhostname`
Now, to have all the mailbox servers use the proxy, simply set the zimbraMailReferMode to reverse-proxied on each mailbox server and restart mailboxd to have all the traffic go through the proxy. Do a 'zmcontrol restart' on this node and you should be up and running.
Please advise.
-
- Posts: 17
- Joined: Sun Feb 02, 2014 9:10 pm
Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Client.
Hi cehau37,
yes. i just follow the step in the document and it is running fine after that. just make sure the ports are correct. i believe tvizirov step also correct. you can follow it.
thanks.
yes. i just follow the step in the document and it is running fine after that. just make sure the ports are correct. i believe tvizirov step also correct. you can follow it.
thanks.
Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Client.
thanks you sir, its really worked
Re: Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Clie
Better use:tvizirov wrote: 2. If the ''zimbraReverseProxySSLToUpstreamEnabled'' is configured to TRUE, the above command will fail with:
"proxy mail mode both is invalid when SSL to upstream is enabled". To change it to FALSE
$ zmlocalconfig zimbraReverseProxySSLToUpstreamEnabled FALSE
zmprov ms `zmhostname` zimbraReverseProxySSLToUpstreamEnabled FALSE
Re: Oops! It appears your browser does not allow cookies. You need to enable cookies in order to use the Zimbra Web Clie
It worked for me.jorgedlcruz wrote:Hi Ahmad Faizal Abdul Latif,
I've tried with zmtlsctl in both, I can assume that you have it too in the same level, try to execute:
zmtlsctl redirect
zmcontrol restart
zmtlsctl both
zmcontrol restart
And let us know, I could see the error that you had one, but when I try to login again, I don't have any problem now.
Let us know.
Thanks Jorgedlcruz