Login page appears, can't login - Gentoo

Ask questions about your setup or get help installing ZCS server (ZD section below).
fak3r
Posts: 16
Joined: Fri Sep 12, 2014 9:57 pm

Login page appears, can't login - Gentoo

Postby fak3r » Tue Oct 11, 2005 12:52 pm

[quote user="14319KevinH"]For mailbox I think I borked the command. It should be:
zmcertinstall mailbox /opt/zimbra/ssl/ssl/server/server.crt /opt/zimbra/ssl/ssl/ca/ca.key[/QUOTE]
zimbra@jorge bin $zmcertinstall mailbox /opt/zimbra/ssl/ssl/server/server.crt /opt/zimbra/ssl/ssl/ca/ca.key

** Importing server cert
keytool error: java.lang.Exception: Failed to establish chain from reply

zimbra@jorge bin $

Having fun yet? :)
fak3r


14319KevinH
Ambassador
Ambassador
Posts: 4558
Joined: Fri Sep 12, 2014 9:52 pm

Login page appears, can't login - Gentoo

Postby 14319KevinH » Tue Oct 11, 2005 1:24 pm

[quote user="fak3r"]Having fun yet? :) [/QUOTE]
Of course!
We've seen that under certain installs too. Can you try starting up Zimbra now? And check the result in catilina.out?
fak3r
Posts: 16
Joined: Fri Sep 12, 2014 9:57 pm

Login page appears, can't login - Gentoo

Postby fak3r » Tue Oct 11, 2005 1:46 pm

Aha, looks clean:
jorge logs # cat catalina.out

Oct 11, 2005 1:40:41 PM org.apache.coyote.http11.Http11Protocol init

INFO: Initializing Coyote HTTP/1.1 on http-7070

Oct 11, 2005 1:40:43 PM org.apache.coyote.http11.Http11Protocol init

INFO: Initializing Coyote HTTP/1.1 on http-7443

Oct 11, 2005 1:40:43 PM org.apache.coyote.http11.Http11Protocol init

INFO: Initializing Coyote HTTP/1.1 on http-7071

Oct 11, 2005 1:40:43 PM org.apache.catalina.startup.Catalina load

INFO: Initialization processed in 4376 ms

Oct 11, 2005 1:40:43 PM org.apache.catalina.core.StandardService start

INFO: Starting service Catalina

Oct 11, 2005 1:40:43 PM org.apache.catalina.core.StandardEngine start

INFO: Starting Servlet Engine: Apache Tomcat/5.5.7

Oct 11, 2005 1:40:43 PM org.apache.catalina.core.StandardHost start

INFO: XML validation disabled

Oct 11, 2005 1:40:45 PM org.apache.catalina.startup.HostConfig deployWAR

INFO: Deploying web application archive service.war

log4j:WARN No appenders could be found for logger (org.apache.catalina.session.ManagerBase).

log4j:WARN Please initialize the log4j system properly.

Oct 11, 2005 1:40:47 PM org.apache.catalina.startup.HostConfig deployWAR

INFO: Deploying web application archive zimbra.war

Oct 11, 2005 1:40:48 PM org.apache.catalina.core.ApplicationContext log

INFO: org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]

Oct 11, 2005 1:40:48 PM org.apache.coyote.http11.Http11Protocol start

INFO: Starting Coyote HTTP/1.1 on http-7070

Oct 11, 2005 1:40:48 PM org.apache.coyote.http11.Http11Protocol start

INFO: Starting Coyote HTTP/1.1 on http-7443

Oct 11, 2005 1:40:48 PM org.apache.tomcat.util.threads.ThreadPool adjustLimits

WARNING: maxThreads setting (5) too low, set to 10

Oct 11, 2005 1:40:49 PM org.apache.coyote.http11.Http11Protocol start

INFO: Starting Coyote HTTP/1.1 on http-7071

Oct 11, 2005 1:40:49 PM org.apache.jk.common.ChannelSocket init

INFO: JK2: ajp13 listening on /0.0.0.0:8009

Oct 11, 2005 1:40:49 PM org.apache.jk.server.JkMain start

INFO: Jk running ID=0 time=0/76 config=null

Oct 11, 2005 1:40:49 PM org.apache.catalina.startup.Catalina start

INFO: Server startup in 6246 ms

jorge logs #

But when I refresh my login screen and enter 'user1 test123' (that's the default login, yes?) I still get the same error:
An unknown application error has occurred. Please correct any errors and retry. If the problem persists, please contact your System Aministrator. (INVALID_PDU)

Thought I'd try a fresh
cd /opt/zimbra/bin; ./zimbra stop; ./zimbra start

I didn't see anything funny in my zimbra/logs dir, so I hit syslog output:
Oct 11 13:44:29 [su(pam_unix)] session opened for user zimbra by (uid=1027)

zimbramon[28129]: [28129] info: STOPPING services_

zimbramon[28135]: [28135] crit: Shutdown request received_

zimbramon[27716]: [27716] info: STOPPING services_

zimbramon[27716]: [27716] crit: Shutting down_

zimbramon[27716]: [27716] info: SIGINT - kill children_

Oct 11 13:44:31 [su(pam_unix)] session closed for user zimbra

Oct 11 13:44:36 [su(pam_unix)] session opened for user zimbra by (uid=1027)

zimbramon[28142]: [28142] info: Starting services_

zimbramon[28142]: [28142] info: STARTING ldap_

zimbramon[28142]: [28142] info: start service ldap_

zimbramon[28142]: [28142] info: STARTING services_

zimbramon[28142]: [28142] info: Doing startup_

zimbramon[28151]: [28151] info: Zimbra Monitor startup: 28151_

zimbramon[28151]: [28151] info: Process 27716 not found - removing /opt/zimbra/zimbramon/FIFO/zm.pid_

zimbramon[28151]: [28151] err: Can't resolve host _

zimbramon[28155]: [28155] info: Status monitor startup_

zimbramon[28156]: [28156] info: Creating soap server on port 7777_

Oct 11 13:44:46 [su(pam_unix)] session closed for user zimbra

But still the same problem/error on login.
fak3r
14319KevinH
Ambassador
Ambassador
Posts: 4558
Joined: Fri Sep 12, 2014 9:52 pm

Login page appears, can't login - Gentoo

Postby 14319KevinH » Tue Oct 11, 2005 4:08 pm

user1/test123 is only the default on a developer install where we create the dummy users. Did you run reset-the-world ant target? Sorry but I forget how exactly you got here.
Anyways if you add ?debug=1 to the end of your URL this will pop a debug window for the webapp as you login and may give us some more details.
fak3r
Posts: 16
Joined: Fri Sep 12, 2014 9:57 pm

Login page appears, can't login - Gentoo

Postby fak3r » Tue Oct 11, 2005 9:20 pm

[quote user="14319KevinH"]user1/test123 is only the default on a developer install where we create the dummy users. Did you run reset-the-world ant target?[/QUOTE]
No, where do I run that?
[quote user="14319KevinH"]Sorry but I forget how exactly you got here.[/QUOTE]
That makes two of us! ;)
[quote user="14319KevinH"]uAnyways if you add ?debug=1 to the end of your URL this will pop a debug window for the webapp as you login and may give us some more details.[/QUOTE]
Will try this once I do the reset-the-world thing. Does that create my user then, or is another step?
Thanks Kevin.
fak3r
14319KevinH
Ambassador
Ambassador
Posts: 4558
Joined: Fri Sep 12, 2014 9:52 pm

Login page appears, can't login - Gentoo

Postby 14319KevinH » Tue Oct 11, 2005 9:33 pm

Ok try this(from the good 'ol blog entry):
- In order to blow away all mailboxes, and create some new ones (think

of it as make clean), you can perform these steps:
$ cd ~/zcs-src/ZimbraServer

$ ant reset-the-world

$ cd ~/zcs-src/ZimbraWebClient

$ ant prod-deploy




These will re-init Zimbra and give you a fresh deploy of the webapp. Notice I use prod-deploy(rather than deploy) here since it will do the gzip of the Javascript files so that will load faster.
rodrigoccurvo
Posts: 40
Joined: Fri Sep 12, 2014 9:55 pm

Login page appears, can't login - Gentoo

Postby rodrigoccurvo » Wed Oct 12, 2005 7:04 am

This error happened to me when dev-installing. I found out that it was because the Soap Servlet was not deployed. I just built and deployed it (can't remember the rule I used) and everything was solved. I guess you can see the error at the debugger window.
fak3r
Posts: 16
Joined: Fri Sep 12, 2014 9:57 pm

Login page appears, can't login - Gentoo

Postby fak3r » Wed Oct 12, 2005 3:23 pm

[quote user="14319KevinH"]

$ cd ~/zcs-src/ZimbraServer

$ ant reset-the-world

$ cd ~/zcs-src/ZimbraWebClient

$ ant prod-deploy

These will re-init Zimbra and give you a fresh deploy of the webapp. Notice I use prod-deploy(rather than deploy) here since it will do the gzip of the Javascript files so that will load faster.[/QUOTE]
I had to


chown -R zimbra:zimbra ~/zcs/ZimbraServer



to get it working, but it fails later - apparently ldap isn't working:


zimbra@jorge /root/zcs-src/ZimbraServer $ ant reset-the-world

Buildfile: build.xml
build-init:
compile:

[echo] Hostname: jorge
generate-buildinfo:

[javac] Compiling 1 source file to /root/zcs-src/ZimbraServer/build/classes
jar:

[jar] Building jar: /root/zcs-src/ZimbraServer/build/dist/lib/zimbrastore.jar
stop-servers-windows:
stop-servers-unix:

[exec] slapd not running

[exec] Result: 1

[exec] Using CATALINA_BASE: /opt/zimbra/tomcat

[exec] Using CATALINA_HOME: /opt/zimbra/tomcat

[exec] Using CATALINA_TMPDIR: /opt/zimbra/tomcat/temp

[exec] Using JRE_HOME: /opt/zimbra/java

[exec] Waiting . shutdown ok
stop-servers:
db-init:

[sql] Executing file: /root/zcs-src/ZimbraServer/src/db/dropdb.sql

[sql] 101 of 101 SQL statements executed successfully

[sql] Executing file: /root/zcs-src/ZimbraServer/src/db/db.sql

[sql] 27 of 27 SQL statements executed successfully

[sql] Executing file: /root/zcs-src/ZimbraServer/build/versions-init.sql

[sql] 3 of 3 SQL statements executed successfully
dir-init:

[echo] If the following deletes fail, wait for your tomcat

[echo] to stop (or stop your tomcat as the case may be)

[echo] and try again later.

[delete] Deleting directory /opt/zimbra/store

[delete] Deleting directory /opt/zimbra/index

[delete] Deleting 3 files from /opt/zimbra/log

[delete] Deleting 5 files from /opt/zimbra/tomcat/logs

[mkdir] Created dir: /opt/zimbra/store

[mkdir] Created dir: /opt/zimbra/index

[mkdir] Created dir: /opt/zimbra/redolog

[mkdir] Created dir: /opt/zimbra/redolog/archive

[mkdir] Created dir: /opt/zimbra/repl

[mkdir] Created dir: /opt/zimbra/backup

[copy] Copying 29 files to /opt/zimbra/db
quick-init:
ldap-init:

[copy] Copying 1 file to /opt/zimbra/conf

[copy] Copying 1 file to /opt/zimbra/openldap/etc/openldap/schema

[copy] Copying 1 file to /opt/zimbra/openldap/etc/openldap/schema

[delete] Deleting directory /opt/zimbra/openldap/var/openldap-data

[mkdir] Created dir: /opt/zimbra/openldap/var/openldap-data
localhost-ssl-cert:

[delete] Deleting 1 files from /opt/zimbra/tomcat/conf

[genkey] Generating Key for tomcat

[genkey] Generating Key for tomcat-dsa
tomcat-init-unix:

[copy] Copying 3 files to /opt/zimbra/bin
tomcat-init:

[copy] Copying 1 file to /opt/zimbra/tomcat/common/lib

[copy] Copying 1 file to /opt/zimbra/tomcat/common/lib

[copy] Copying 1 file to /opt/zimbra/tomcat/common/lib

[copy] Copying 1 file to /opt/zimbra/tomcat/common/endorsed

[copy] Copying 1 file to /opt/zimbra/lib
start-ldap-windows:
start-ldap-unix:

[exec] Started slapd: pid
start-ldap:
ldap-load-step1:

[exec] ldap_bind: Can't contact LDAP server (-1)

[exec] Result: 1

[echo] Editing localconfig zimbra_server_hostname to be jorge

[echo] Provisioning server entry for jorge

[java] ERROR: service.FAILURE (system failure: getDirectContext) (cause: javax.naming.CommunicationException localhost:389)
BUILD FAILED

/root/zcs-src/ZimbraServer/build.xml:494: Java returned: 2
Total time: 42 seconds

zimbra@jorge /root/zcs-src/ZimbraServer $



So ldap is failing to kick off, I think that's the issue. I manually went over and tried to start it, but it doesn't seem to be starting, or logging why it's not:


zimbra@jorge /opt/zimbra/bin $ ./ldap start; cat ../log/*

db_recover: Finding last valid log LSN: file: 1 offset 28

Started slapd: pid

cat: ../log/*: No such file or directory

zimbra@jorge /opt/zimbra/bin $ ./ldap stop

slapd not running

zimbra@jorge /opt/zimbra/bin $ cat ../log/*

cat: ../log/*: No such file or directory

zimbra@jorge /opt/zimbra/bin $



How can I debug ldap then? Thanks again.
UPDATE: when I try to login, I now get this error:
An unknown application error has occurred. Please correct any errors and retry. If the problem persists, please contact your System Aministrator. (AjxException.UNKNOWN_ERROR)

fak3r
14319KevinH
Ambassador
Ambassador
Posts: 4558
Joined: Fri Sep 12, 2014 9:52 pm

Login page appears, can't login - Gentoo

Postby 14319KevinH » Wed Oct 12, 2005 3:47 pm

[quote user="fak3r"] How can I debug ldap then?[/QUOTE]
Try:
/opt/zimbra/openldap/libexec/slapd -d 10 -4 -u zimbra -h ldap://:7389/ -f /opt/zimbra/conf/slapd.conf
fak3r
Posts: 16
Joined: Fri Sep 12, 2014 9:57 pm

Login page appears, can't login - Gentoo

Postby fak3r » Thu Oct 13, 2005 2:26 pm

This tells me some stuff, but I don't know how to fix it so Ldap will run:
zimbra@jorge ~ $ /opt/zimbra/openldap/libexec/slapd -d 10 -4 -u zimbra -h ldap://:7389/ -f /opt/zimbra/conf/slapd.conf

@(#) $OpenLDAP: slapd 2.2.26 (Aug 17 2005 00:15:16) $

marcmac@depot.liquidsys.com:/space/home/marcmac/p4/main/ThirdParty/openldap/openldap-2.2.26/servers/slapd

bdb_db_init: Initializing BDB database

bdb(): unable to initialize mutex: Function not implemented

bdb(): /opt/zimbra/openldap/var/openldap-data/__db.001: unable to initialize environment lock: Function not implemented

bdb_db_open: dbenv_open failed: Function not implemented (38)

backend_startup: bi_db_open failed! (38)

bdb(): DB_ENV->lock_id_free interface requires an environment configured for the locking subsystem

bdb(): txn_checkpoint interface requires an environment configured for the transaction subsystem

bdb_db_destroy: txn_checkpoint failed: Invalid argument (22)

slapd stopped.

connections_destroy: nothing to destroy.

Return to “Installation and Upgrade”

Who is online

Users browsing this forum: No registered users and 5 guests