fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Ask questions about your setup or get help installing ZCS server (ZD section below).
keyhman
Posts: 10
Joined: Fri Sep 12, 2014 10:06 pm

fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Postby keyhman » Fri Apr 14, 2006 7:11 am

Hi. I read some posts, didn't see anything scary so I ran the upgrade on my mail server -> it took a long time to upgrade everything but it seemed to work without any errors, just long pauses as it imported my saved configuration.
But..the key feature I was after in the upgrade - mail queue management doesn't work. When I click on "Mail Queues" : get an error msg pop-up with this message:
Message: system failure: exception during auth {RemoteManager: mx1.example.com->zimbra@mx1.example.com:22}

com.zimbra.cs.service.ServiceException: system failure: exception during auth {RemoteManager: mx1.example.com->zimbra@mx1.example.com:22}

at com.zimbra.cs.service.ServiceException.FAILURE(ServiceException.java:131)

at com.zimbra.cs.rmgmt.RemoteManager.getSession(RemoteManager.java:192)

at com.zimbra.cs.rmgmt.RemoteManager.execute(RemoteManager.java:129)

at com.zimbra.cs.service.admin.GetMailQueueInfo.handle(GetMailQueueInfo.java:55)

at com.zimbra.soap.SoapEngine.dispatchRequest(SoapEngine.java:255)

at com.zimbra.soap.SoapEngine.dispatch(SoapEngine.java:163)

at com.zimbra.soap.SoapEngine.dispatch(SoapEngine.java:84)

at com.zimbra.soap.SoapServlet.doPost(SoapServlet.java:228)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)

at com.zimbra.cs.servlet.ZimbraServlet.service(ZimbraServlet.java:154)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)

at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)

at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)

at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)

at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)

at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:541)

at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)

at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)

at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)

at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)

at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)

at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)

at java.lang.Thread.run(Thread.java:595)

Caused by: java.io.IOException: auth failed

at com.zimbra.cs.rmgmt.RemoteManager.getSession(RemoteManager.java:185)

... 24 more
Error code: service.FAILURE

Method: ZmCsfeCommand.prototype.invoke

Details:soap:Receiver


Sorry for the long msg but I haven't seen anyone else refernce a problem like this since the upgrade was released. any ideas?
steve.


keyhman
Posts: 10
Joined: Fri Sep 12, 2014 10:06 pm

fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Postby keyhman » Fri Apr 14, 2006 8:32 am

If I'm upgrading from previous version is there a new remote management command that wasn't a feature in previous versions?
From what I can see zmrcd == sshd and zmrc == ssh -c
If that's true, then there's a conflict. I use ssh for remote systems management on port 22. I've changed other ports on the original install to avoid conflicts with apache, etc...
Do I need to use zmprov to change the remote management port to an unused value to fix the mail queues error message I still get from admin gui?
steve
keyhman
Posts: 10
Joined: Fri Sep 12, 2014 10:06 pm

fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Postby keyhman » Fri Apr 14, 2006 8:35 am

On a hunch I tried using this:

zmprov ms mx1.example.com zimbraRemoteManagementPort 8022
zmcontrol stop && zmcontrol start
I tried the mail queues gui again and The error message changed to show the port number modification I made:
Message: system failure: exception during auth {RemoteManager: mx1.example->zimbra@mx1.example.com:8022}

com.zimbra.cs.service.ServiceException: system failure: exception during auth {RemoteManager: mx1.example.com->zimbra@mx1.example.com:8022}

at com.zimbra.cs.service.ServiceException.FAILURE(ServiceException.java:131)

at
.....
Caused by: java.io.IOException: There was a problem while talking to mx1.example:8022

at ch.ethz.ssh2.Connection.connect(Connection.java:642)

at ch.ethz.ssh2.Connection.connect(Connection.java:460)

at com.zimbra.cs.rmgmt.RemoteManager.getSession(RemoteManager.java:183)

... 24 more

Caused by: java.net.ConnectException: Connection refused

at java.net.PlainSocketImpl.socketConnect(Native Method)

at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)

at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)

at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)

at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)

at java.net.Socket.connect(Socket.java:507)

at ch.ethz.ssh2.transport.TransportManager.initialize(TransportManager.java:299)

at ch.ethz.ssh2.Connection.connect(Connection.java:591)

... 26 more
Error code: service.FAILURE

Method: ZmCsfeCommand.prototype.invoke

Details:soap:Receiver
This is obviously different from the first error -- is it possible that the remote management relies on the system ssh daemon ?
please clarify.
steve.
keyhman
Posts: 10
Joined: Fri Sep 12, 2014 10:06 pm

fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Postby keyhman » Fri Apr 14, 2006 8:50 am

Working on the assumption that zimbra relies on the system ssh daemon (Based on previous posted msgs) I've reverted back to port 22 in the server configs for my host:
zmprov ms mx1.example.com zimbraRemoteManagementPort 22
zmcontrol stop && zmcontrol start
and the message reverted back to the original error -- hence my conclusion that the system ssh daemon is part of this puzzle.
it seems to me like the ssh daemon isn't recognizing or accepting the certificate found in ~zimbra/.ssh/zimbra_identity
can anyone clarify and advise on a fix?
steve.
keyhman
Posts: 10
Joined: Fri Sep 12, 2014 10:06 pm

fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Postby keyhman » Fri Apr 14, 2006 9:09 am

I found the solution.
If you read the man page to ssh and sshd , you'll find that for PubKey auth, the host must be authorized for this method of auth. That requires the host public key to be present in ~zimbra/.ssh/authorized_hosts and ~zimbra/.ssh/known_hosts
I manually copied the contents of ~zimbra/.ssh/zimbra_identity.pub to these two files and the queue manager started working immediately. no more errors.
Great new feature guys. keep up the good work.
steve
14319KevinH
Ambassador
Ambassador
Posts: 4558
Joined: Fri Sep 12, 2014 9:52 pm

fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Postby 14319KevinH » Fri Apr 14, 2006 10:37 am

Thanks. Can you file this in bugzilla?
adobrin
Advanced member
Advanced member
Posts: 134
Joined: Fri Sep 12, 2014 9:56 pm

fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Postby adobrin » Fri Apr 14, 2006 10:44 am

i don't seem to have an executable 'zmqstat' .. where should this file be?
Message: system failure: exception executing command: zmqstat all with {RemoteManager: mail.domain.com->zimbra@mail.domain.com:22}

com.zimbra.cs.service.ServiceException: system failure: exception executing command: zmqstat all with {RemoteManager: mail.domain.com->zimbra@mail.domain.com:22}

at com.zimbra.cs.service.ServiceException.FAILURE(ServiceException.java:131)

at com.zimbra.cs.rmgmt.RemoteManager.execute(RemoteManager.java:161)

at com.zimbra.cs.service.admin.GetMailQueueInfo.handle(GetMailQueueInfo.java:55)

at com.zimbra.soap.SoapEngine.dispatchRequest(SoapEngine.java:255)

at com.zimbra.soap.SoapEngine.dispatch(SoapEngine.java:163)

at com.zimbra.soap.SoapEngine.dispatch(SoapEngine.java:84)

at com.zimbra.soap.SoapServlet.doPost(SoapServlet.java:228)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)

at com.zimbra.cs.servlet.ZimbraServlet.service(ZimbraServlet.java:154)

at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)

at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)

at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)

at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)

at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)

at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)

at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)

at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)

at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:541)

at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)

at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)

at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)

at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)

at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)

at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)

at java.lang.Thread.run(Thread.java:595)

Caused by: java.io.IOException: command failed127

at com.zimbra.cs.rmgmt.RemoteManager.execute(RemoteManager.java:156)

... 23 more
Error code: service.FAILURE

Method: ZmCsfeCommand.prototype.invoke

Details:soap:Receiver
14319KevinH
Ambassador
Ambassador
Posts: 4558
Joined: Fri Sep 12, 2014 9:52 pm

fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Postby 14319KevinH » Fri Apr 14, 2006 10:59 am

[quote user="adobrin"]i don't seem to have an executable 'zmqstat' .. where should this file be?[/QUOTE]
libexec/zmqstat
adobrin
Advanced member
Advanced member
Posts: 134
Joined: Fri Sep 12, 2014 9:56 pm

fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Postby adobrin » Fri Apr 14, 2006 11:00 am

[zimbra@mail libexec]$ ./zmqstat

Can't chdir to /opt/zimbra/postfix-2.2.9/spool/incoming at ./zmqstat line 182.

[zimbra@mail libexec]$
adobrin
Advanced member
Advanced member
Posts: 134
Joined: Fri Sep 12, 2014 9:56 pm

fc4 zcs-3.0.1 -> 3.1 upgrade worked great.. almost

Postby adobrin » Fri Apr 14, 2006 11:02 am

which user is it supposed to be logging in as?
spool/* are all postfix owned, and most of them chmod 400 (ish).

Return to “Installation and Upgrade”

Who is online

Users browsing this forum: No registered users and 3 guests