Starting LDAP - FAIL. Ubuntu, dapper

Ask questions about your setup or get help installing ZCS server (ZD section below).
cshepherd
Posts: 45
Joined: Fri Sep 12, 2014 10:11 pm

Starting LDAP - FAIL. Ubuntu, dapper

Postby cshepherd » Mon Jul 03, 2006 10:03 pm

Yep, does starting from scratch count? Nothing else has been installed except for Zimbra. I don't have any log files to work with any more as the box is happily running 3.1.0 now. I might try 3.1.4 when the Debian version comes out. Would absolutely love to see an Ubuntu version.


st_lim
Posts: 1
Joined: Fri Sep 12, 2014 10:13 pm

Starting LDAP - FAIL. Ubuntu, dapper

Postby st_lim » Wed Jul 05, 2006 12:39 pm

Hi,

I had the same problem, and found that it could be solved if you remove the file

/opt/zimbra/openldap/etc/openldap/schema/zimbra-hsm.schema.
The reason is that the directory in /opt/zimbra/openldap/etc/openldap/schema is typically automatically scanned by slapd when it starts, so having two zimbra-hsm.schema just causes failures.
My bug report filed as bug number 8793
cshepherd
Posts: 45
Joined: Fri Sep 12, 2014 10:11 pm

Starting LDAP - FAIL. Ubuntu, dapper

Postby cshepherd » Thu Jul 06, 2006 6:00 am

Hey, thanks for the tip.
I tried 3.1.4 and that actually went fine except LDAP failed due to needing one version behind what dapper needs for libssl.
Installed that and it was all good.
inzanix
Posts: 19
Joined: Fri Sep 12, 2014 10:02 pm

Starting LDAP - FAIL. Ubuntu, dapper

Postby inzanix » Mon Jul 10, 2006 9:03 am

I have attempted to install zcs 3.1.4 on Ubuntu Dapper Drake. My situation:
almost a virgin machine. any software that has been installed is not active so there are no port conflicts

I did nned to create symbolic links to libssl and libcrypto as Dapper uses 0.9.8 and zcs excpected 0.9.7. Other than the only non expected occurence was a warning about setting up an MX record, which I ignored as I have no control over that.

Everything seems to run well until this output occur:

*** CONFIGURATION COMPLETE - press 'a' to apply

Select from menu, or press 'a' to apply config (? - help) a

Save configuration data to a file? [Yes]

Save config in file: [/opt/zimbra/config.12066]

Saving config in /opt/zimbra/config.12066...Done

The system will be modified - continue? [No] y

Operations logged to /tmp/zmsetup.log.12066

Setting local config values...Done

Setting up CA...Done

Creating SSL certificate...Done

Initializing ldap...FAILED (256)


ERROR

Configuration failed
I tried removing the zimbra-hsm.schema as noted in an earlier post and the using zmcontrol start. But this just spits out:

Host bcx-kennymik.domain.corp

Starting ldap...Done.

FAILED

ERROR - failed to start slapd
I can find nothing in any of the logs to assist.
Can anyboby help me with this please?
Mike
bobby
Zimbra Employee
Zimbra Employee
Posts: 515
Joined: Fri Sep 12, 2014 10:01 pm

Starting LDAP - FAIL. Ubuntu, dapper

Postby bobby » Mon Jul 10, 2006 4:07 pm

inzanix
Posts: 19
Joined: Fri Sep 12, 2014 10:02 pm

Starting LDAP - FAIL. Ubuntu, dapper

Postby inzanix » Tue Jul 11, 2006 2:01 am

THanks Bobby, this gave me some clues as to where to look. Turned out that the problem was my attempt to fake zimbrar into using 0.9.8 of openssl with the symlinks. Obtaining a copy of 0.9.7 resolved the problem with ldap.

Since Dapper ships with 0.9.8 this is likely to effect everybody who attempts this platform - any chance of certification with 0.9.8?
Awesome product (been using it on FC4 all year)
thanks guys
Mike
inzanix
Posts: 19
Joined: Fri Sep 12, 2014 10:02 pm

Starting LDAP - FAIL. Ubuntu, dapper

Postby inzanix » Tue Jul 11, 2006 4:59 am

libdb3.so.3 is require and does not ship with Dapper Drake

Now most things start. Except logger and snmp. Any ideas? I can find no relevant output. Otherwise I can get into both the administrative console and the user screen
Mike
14319KevinH
Ambassador
Ambassador
Posts: 4558
Joined: Fri Sep 12, 2014 9:52 pm

Starting LDAP - FAIL. Ubuntu, dapper

Postby 14319KevinH » Thu Jul 13, 2006 10:30 pm

Might be a good idea to start a wiki page on this so you can collect all the tips and allow others to test with you.

Return to “Installation and Upgrade”

Who is online

Users browsing this forum: Google [Bot] and 6 guests