Hello!
Release 8.8.15.GA.3869.UBUNTU16.64 UBUNTU16_64 FOSS edition, Patch 8.8.15_P18.
There is a problem with updating the OS version.
Now I use Ubuntu 16. I read this article: https://wiki.zimbra.com/wiki/Ubuntu_Upgrades, and according to it, I updated Ubuntu 16 to 18.
Everything went according to plan, but at the start of Zimbra, it did not start zmlogswatchctl service. I tried to fix the permissions, but it didn't help. I found that the /opt/zimbra/log/zmlogswatch.out contains an error "RRDs.c: loadable library and perl binaries are mismatched (got handshake key 0xdb00080, needed 0xde00080)".
Probably because of this error, it does not start zmlogswatchctl?
At the moment, I have rolled back to the previous version of the OS.
Please tell me how to fix this error.
zmlogswatchctl fail after OS update
- JDunphy
- Outstanding Member
- Posts: 897
- Joined: Fri Sep 12, 2014 11:18 pm
- Location: Victoria, BC
- ZCS/ZD Version: 9.0.0_P39 NETWORK Edition
Re: zmlogswatchctl fail after OS update
Wild guess.GlooM wrote: I found that the /opt/zimbra/log/zmlogswatch.out contains an error "RRDs.c: loadable library and perl binaries are mismatched (got handshake key 0xdb00080, needed 0xde00080)".
That message generally means A dynamic library .so was being loaded into the process that was built against a different build of perl than the said library was compiled against. Reinstalling the XS module will likely fix this error.
You could try this first to see if this is the correct module.
Code: Select all
% su - zimbra
% perl -MRRDs -le 'print q(ok!)'
ok!
Code: Select all
# su - zimbra
% cd /opt/zimbra/common/lib/perl5/
% find . -name \*RRD\* -print
./x86_64-linux-thread-multi/RRDs.pm
./x86_64-linux-thread-multi/auto/RRDs
./x86_64-linux-thread-multi/auto/RRDs/RRDs.bs
./x86_64-linux-thread-multi/auto/RRDs/RRDs.so
./x86_64-linux-thread-multi/auto/RRDp
./RRDp.pm
Seems odd that this bug would not have been reported with solutions provided in these forums somewhere. I don't run ubuntu on my servers so am of limited help here. Your other option is to find the version being shipped with zimbra and swap out the RRDS stuff manually once you find the correct combination that works with the perl shipped. Either they forgot to update that module in their repository or you forgot to update the modules would be my initial focus in starting to debug root cause for this failure.
HTH,
Jim
Re: zmlogswatchctl fail after OS update
Hello,
Had the same kind of issue after updating from ubuntu 14 to 16 and Zimbra.
Feb 25 12:08:51 mail kernel: [ 1556.590025] zmrrdfetch[21338]: segfault at 5 ip 00007fc5c465783e sp 00007ffe0384ed50 error 4 in RRDs.so[7fc5c4653000+6000]
To fix it, I did another upgrade (after ./install -s run ./install.sh) and the issue is gone. I'm sure I've done other upgrades like this away before with install -s and followed by upgrade (install.sh) with no issues. This time I just followed that zimbra doc that just says to run install.sh -s like you probably did and got the problem too.
Had the same kind of issue after updating from ubuntu 14 to 16 and Zimbra.
Feb 25 12:08:51 mail kernel: [ 1556.590025] zmrrdfetch[21338]: segfault at 5 ip 00007fc5c465783e sp 00007ffe0384ed50 error 4 in RRDs.so[7fc5c4653000+6000]
To fix it, I did another upgrade (after ./install -s run ./install.sh) and the issue is gone. I'm sure I've done other upgrades like this away before with install -s and followed by upgrade (install.sh) with no issues. This time I just followed that zimbra doc that just says to run install.sh -s like you probably did and got the problem too.
Re: zmlogswatchctl fail after OS update
JDunphy and scantec thanks for the help!
I solved the problem!
The instructions contained an incorrect installation sequence.
According to the instructions, it was necessary to perform:
1) Update packets on old OS (Ubuntu 16)
2) Upgrade OS (Ubuntu 16 -> Ubuntu 18)
3) Install Zimbra (./install.sh -s --skip-activation-check)
4) Copy "install_history" and "localconfig.xml" files from the backup
5) Run "zmsetup.pl"
There is a mistake here.
Correct sequence of actions:
1) Update packets on old OS (Ubuntu 16)
2) Upgrade OS (Ubuntu 16 -> Ubuntu 18)
3) Install Zimbra (./install.sh -s --skip-activation-check)
4) Update packages in OS after installing Zimbra (apt update; apt upgrade)
5) Copy "install_history" and "localconfig.xml" files from the backup
6) Run "zmsetup.pl"
After installing Zimbra (./install.sh -s --skip-activation-check), 106 new packages are being updated from the repositories!
After updating these 106 packages, all services start successfully! Pearl is installing the correct version!
I solved the problem!
The instructions contained an incorrect installation sequence.
According to the instructions, it was necessary to perform:
1) Update packets on old OS (Ubuntu 16)
2) Upgrade OS (Ubuntu 16 -> Ubuntu 18)
3) Install Zimbra (./install.sh -s --skip-activation-check)
4) Copy "install_history" and "localconfig.xml" files from the backup
5) Run "zmsetup.pl"
There is a mistake here.
Correct sequence of actions:
1) Update packets on old OS (Ubuntu 16)
2) Upgrade OS (Ubuntu 16 -> Ubuntu 18)
3) Install Zimbra (./install.sh -s --skip-activation-check)
4) Update packages in OS after installing Zimbra (apt update; apt upgrade)
5) Copy "install_history" and "localconfig.xml" files from the backup
6) Run "zmsetup.pl"
After installing Zimbra (./install.sh -s --skip-activation-check), 106 new packages are being updated from the repositories!
Code: Select all
root@mail:~/zcs-8.8.15_GA_3869.UBUNTU18_64.20190918004220# apt update
Сущ:1 http://ru.archive.ubuntu.com/ubuntu bionic InRelease
Сущ:2 http://ru.archive.ubuntu.com/ubuntu bionic-updates InRelease
Сущ:3 http://ru.archive.ubuntu.com/ubuntu bionic-backports InRelease
Сущ:4 https://repo.zimbra.com/apt/87 bionic InRelease
Сущ:5 https://repo.zimbra.com/apt/8815 bionic InRelease
Сущ:6 http://security.ubuntu.com/ubuntu bionic-security InRelease
Чтение списков пакетов… Готово
Построение дерева зависимостей
Чтение информации о состоянии… Готово
Может быть обновлено 106 пакетов. Запустите «apt list --upgradable» для их показа.
root@mail:~/zcs-8.8.15_GA_3869.UBUNTU18_64.20190918004220# apt upgrade
Чтение списков пакетов… Готово
Построение дерева зависимостей
Чтение информации о состоянии… Готово
Расчёт обновлений… Готово
Следующие пакеты устанавливались автоматически и больше не требуются:
libcurses-perl libcurses-ui-perl libterm-readkey-perl
Для их удаления используйте «apt autoremove».
Следующие НОВЫЕ пакеты будут установлены:
libgraphite2-3 libharfbuzz0b
Следующие пакеты будут обновлены:
zimbra-altermime zimbra-amavis-logwatch zimbra-amavisd zimbra-apache-base zimbra-apr-lib zimbra-apr-util-lib zimbra-aspell-ar zimbra-aspell-da zimbra-aspell-de zimbra-aspell-en zimbra-aspell-es zimbra-aspell-fr zimbra-aspell-hi
zimbra-aspell-hu zimbra-aspell-it zimbra-aspell-nl zimbra-aspell-pl zimbra-aspell-pt-br zimbra-aspell-ru zimbra-aspell-sv zimbra-aspell-zimbra zimbra-base zimbra-bdb-lib zimbra-clamav-db zimbra-curl zimbra-curl-lib zimbra-cyrus-sasl
zimbra-cyrus-sasl-lib zimbra-dnscache-base zimbra-freetype-lib zimbra-heimdal-lib zimbra-ldap-base zimbra-libart-lib zimbra-libbsd-lib zimbra-libltdl-lib zimbra-libpng-lib zimbra-libsodium-lib zimbra-libxml2-lib zimbra-lmdb
zimbra-lmdb-lib zimbra-mta-base zimbra-net-snmp zimbra-net-snmp-lib zimbra-opendkim zimbra-opendkim-lib zimbra-openjdk-cacerts zimbra-openldap-client zimbra-openldap-lib zimbra-openldap-server zimbra-osl zimbra-perl-base
zimbra-perl-canary-stability zimbra-perl-carp-clan zimbra-perl-class-inspector zimbra-perl-convert-asn1 zimbra-perl-convert-binhex zimbra-perl-convert-tnef zimbra-perl-crypt-saltedhash zimbra-perl-date-manip
zimbra-perl-email-date-format zimbra-perl-encode-locale zimbra-perl-error zimbra-perl-exporter-tiny zimbra-perl-file-grep zimbra-perl-file-listing zimbra-perl-file-tail zimbra-perl-geography-countries zimbra-perl-http-date
zimbra-perl-io-html zimbra-perl-io-sessiondata zimbra-perl-io-stringy zimbra-perl-ip-country zimbra-perl-json-pp zimbra-perl-lwp-mediatypes zimbra-perl-mailtools zimbra-perl-math-bigint zimbra-perl-mime-lite zimbra-perl-mime-tools
zimbra-perl-mime-types zimbra-perl-mozilla-ca zimbra-perl-net-cidr zimbra-perl-net-cidr-lite zimbra-perl-net-server zimbra-perl-parent zimbra-perl-task-weaken zimbra-perl-timedate zimbra-perl-uri zimbra-perl-www-robotrules
zimbra-perl-xml-namespacesupport zimbra-perl-xml-parser-lite zimbra-perl-xml-sax zimbra-perl-xml-sax-base zimbra-perl-zmq-constants zimbra-postfix zimbra-postfix-logwatch zimbra-proxy-base zimbra-rrdtool zimbra-rrdtool-lib
zimbra-rsync zimbra-snmp-base zimbra-spell-base zimbra-store-base zimbra-tcmalloc-lib zimbra-unbound zimbra-unbound-lib zimbra-zeromq-lib
-
- Posts: 5
- Joined: Wed Jul 27, 2016 4:25 am
- Contact:
Re: zmlogswatchctl fail after OS update
I have rsynced the perl5 directory from the fresh install package of zimbra to directory /opt/zimbra/common/lib/perl5. Then it works.