Unique message i receive in that log when I search is:
2014-06-02 12:22:26,069 INFO [qtp1097575009-152456:https://172.23.0.36:443/service/soap/Se ... cesRequest] [name=slorenzo@savia.net;mid=258;ip=81.34.14.106;ua=ZimbraWebClient - GC34 (Linux)/8.0.7_GA_6021;] soap - SearchCalendarResourcesRequest elapsed=4
2014-06-02 12:22:26,103 ERROR [qtp1097575009-152474:https://172.23.0.36:443/service/soap/Ge ... usyRequest] [name=slorenzo@savia.net;mid=258;ip=81.34.14.106;ua=ZimbraWebClient - GC34 (Linux)/8.0.7_GA_6021;] fb - can't find free/busy provider for user
2014-06-02 12:22:26,103 INFO [qtp1097575009-152474:https://172.23.0.36:443/service/soap/Ge ... usyRequest] [name=slorenzo@savia.net;mid=258;ip=81.34.14.106;ua=ZimbraWebClient - GC34 (Linux)/8.0.7_GA_6021;] soap - GetFreeBusyRequest elapsed=1
Zimbra Open Source: Resources - Locations not showing in calendar
-
- Advanced member
- Posts: 50
- Joined: Sat Sep 13, 2014 3:26 am
-
- Posts: 1
- Joined: Sat Sep 13, 2014 2:26 am
Zimbra Open Source: Resources - Locations not showing in calendar
I was having this exact same problem: users could find the resources using the "Internal" GAL mode, but not for "External" or "Both." My logs looked exactly like
Salva_savia's in the post above.
When I ran "zmprov gds galsync@example.com" I noticed there was no internal data source defined, so I added one based on the instructions from the wiki, then I forced the sync as quoted earlier in the thread by jorgedelacruz.es (zmgsautil forceSync -a galsync@example.com -n InternalGAL). It now works using GAL mode "Both."
zimbra@zimbra:~ $ zmprov gds galsync@example.com
# name ldap
# type gal
objectClass: zimbraDataSource
objectClass: zimbraGalDataSource
zimbraCreateTimestamp: 20140409212615Z
zimbraDataSourceEnabled: TRUE
zimbraDataSourceFolderId: 257
zimbraDataSourceId: 8e26d216-a387-4fe4-8b67-54ef9a19f9e0
zimbraDataSourceName: ldap
zimbraDataSourcePollingInterval: 1d
zimbraDataSourceType: gal
zimbraGalLastSuccessfulSyncTimestamp: 20140624223825Z
zimbraGalStatus: enabled
zimbraGalType: ldap
zimbra@zimbra:~ $ zmmailbox -z -m galsync@example.com createFolder --view contact /_InternalGAL
308
zimbra@zimbra:~ $ zmgsautil addDataSource -a galsync@example.com -n InternalGAL --domain example.com -t zimbra -f _InternalGAL -p 1d
galsync@example.com 91c5e477-2426-4e3c-ac60-bbde4de67048
zimbra@zimbra:~ $ zmprov gds galsync@example.com
# name ldap
# type gal
objectClass: zimbraDataSource
objectClass: zimbraGalDataSource
zimbraCreateTimestamp: 20140409212615Z
zimbraDataSourceEnabled: TRUE
zimbraDataSourceFolderId: 257
zimbraDataSourceId: 0b961d1c-ea68-46e4-9255-4c57e55ca2a8
zimbraDataSourceName: ldap
zimbraDataSourcePollingInterval: 1d
zimbraDataSourceType: gal
zimbraGalLastSuccessfulSyncTimestamp: 20140624223825Z
zimbraGalStatus: enabled
zimbraGalType: ldap
# name InternalGAL
# type gal
objectClass: zimbraDataSource
objectClass: zimbraGalDataSource
zimbraCreateTimestamp: 20140624225136Z
zimbraDataSourceEnabled: TRUE
zimbraDataSourceFolderId: 720
zimbraDataSourceId: 91c5e477-2426-4e3c-ac60-bbde4de67048
zimbraDataSourceName: InternalGAL
zimbraDataSourcePollingInterval: 1d
zimbraDataSourceType: gal
zimbraGalStatus: enabled
zimbraGalType: zimbra
Salva_savia's in the post above.
When I ran "zmprov gds galsync@example.com" I noticed there was no internal data source defined, so I added one based on the instructions from the wiki, then I forced the sync as quoted earlier in the thread by jorgedelacruz.es (zmgsautil forceSync -a galsync@example.com -n InternalGAL). It now works using GAL mode "Both."
zimbra@zimbra:~ $ zmprov gds galsync@example.com
# name ldap
# type gal
objectClass: zimbraDataSource
objectClass: zimbraGalDataSource
zimbraCreateTimestamp: 20140409212615Z
zimbraDataSourceEnabled: TRUE
zimbraDataSourceFolderId: 257
zimbraDataSourceId: 8e26d216-a387-4fe4-8b67-54ef9a19f9e0
zimbraDataSourceName: ldap
zimbraDataSourcePollingInterval: 1d
zimbraDataSourceType: gal
zimbraGalLastSuccessfulSyncTimestamp: 20140624223825Z
zimbraGalStatus: enabled
zimbraGalType: ldap
zimbra@zimbra:~ $ zmmailbox -z -m galsync@example.com createFolder --view contact /_InternalGAL
308
zimbra@zimbra:~ $ zmgsautil addDataSource -a galsync@example.com -n InternalGAL --domain example.com -t zimbra -f _InternalGAL -p 1d
galsync@example.com 91c5e477-2426-4e3c-ac60-bbde4de67048
zimbra@zimbra:~ $ zmprov gds galsync@example.com
# name ldap
# type gal
objectClass: zimbraDataSource
objectClass: zimbraGalDataSource
zimbraCreateTimestamp: 20140409212615Z
zimbraDataSourceEnabled: TRUE
zimbraDataSourceFolderId: 257
zimbraDataSourceId: 0b961d1c-ea68-46e4-9255-4c57e55ca2a8
zimbraDataSourceName: ldap
zimbraDataSourcePollingInterval: 1d
zimbraDataSourceType: gal
zimbraGalLastSuccessfulSyncTimestamp: 20140624223825Z
zimbraGalStatus: enabled
zimbraGalType: ldap
# name InternalGAL
# type gal
objectClass: zimbraDataSource
objectClass: zimbraGalDataSource
zimbraCreateTimestamp: 20140624225136Z
zimbraDataSourceEnabled: TRUE
zimbraDataSourceFolderId: 720
zimbraDataSourceId: 91c5e477-2426-4e3c-ac60-bbde4de67048
zimbraDataSourceName: InternalGAL
zimbraDataSourcePollingInterval: 1d
zimbraDataSourceType: gal
zimbraGalStatus: enabled
zimbraGalType: zimbra
Re: Zimbra Open Source: Resources - Locations not showing in calendar
Maybe GAL list didn't updated after adding the resource, try to force it, it worked for me.
Re: Zimbra Open Source: Resources - Locations not showing in calendar
Isso funcionou para mim:
zmgsautil forceSync -a galsync@example.com -n InternalGAL
zmgsautil forceSync -a galsync@example.com -n InternalGAL